You are here:Products»Conventional»Low Energy and LED»Arri L7-C LED Fresnel

Arri L7-C LED Fresnel Featured

The ARRI L-Series is an LED Fresnel fixture so close to its conventional counterpart in function and performance that it offers a like-for-like replacement of traditional Fresnels with LED-based units.


The L-Series is the first Arri LED fixture to truly incorporate the Fresnel characteristics of smooth continuous focusability from spot to flood.


The L-Series allows for complete control over the colour and intensity of light. Light emitted from the L7 is specifically calibrated for optimal reproduction on broadcast and digital cinema cameras, ensuring pleasing skin tones and vividly rendered colours.


Colour temperature, tint and hue can be continuously adjusted from 2800 K to 10,000 K, between full plus or minus green and RGBW colors. The Hybrid unit allows for cooling both passively (without a fan) and actively (with a fan).



Feature Summary:


  • Fully Tuneable from 2,800 - 10,000K Plus/Minus green correction Vibrate Colour Selection (RGB+W Colour Gamut) Hue and Saturation Control
  • High Colour Rendering
  • Low Power Consumption (160W Nominal)
  • Fully Dimmable
  • True Fresnel Lens Light Characteristics
  • Onboard DMX In and Out
  • RDM Implementation
  • USB Mini Connection for Firmware Updates
  • Hybrid Cooling Version
  • Fan Mode Selection
  • Complete with Barndoor




Estimated LED Lifetime (L70) 50,000 hours
Estimated Color Shift Over Lifetime < 200 K



Dimming 0 -100% Continuous

White Light 2,800 K - 10,000 K Continuously Variable Correlated Color Temperature

Color Rendition CRI 95 (3,200 K to 6,500 K)



Pan: 540°
Tilt: 232°
Pan and tilt speed: Adjustable via onboard control panel and DMX

Tilt Angle +/- 90°



Colored Light Full RGB+W Color Gamut with Hue and Saturation Control

Green-Magenta Adjustment Continuously Adjustable (Full Minusgreen to Full Plusgreen)Color Temperature Tolerance +/- 100 K (nominal), +/- 1/8 Green-Magenta (nominal)



Beam Angle 15° - 50° (Half Peak Angle)



Power Supply Range 100 - 250V AC, 50-60Hz
Power Consumption 160 W Nominal, 220 W Maximum



Active: -20 - 45° C (-4 - 113° F)



Pole Op Version - 12.5 kg (27.5 lbs)


Measurement & Size:

Lens Diameter 175 mm / 7 inch


IP rating:

IP 20



Local Control or Control 5-Pin DMX In and Through, Optional On-Board Controller, Mini-USB
Remote Device Management (RDM) DMX Setup, Hour Counter and Standard RDM Commands
Mini-USB Interface DMX Setup, Fixture Status and Firmware Upgrade Through PC Software